Spectroelectrochemical set up using Model 3325
Spectroelectrochemistry (SEC) is aimed at the investigation of electrochemical reaction mechanism and the interface structure between electrolyte solution and electrode. Remarkable progress in this field and related technology enables SEC to be applied in wide areas. Nowadays, the relation between absorbance and potential for reversible or quasi-reversible system is theoretically elucidated, on which basis the analysis of electrochemical characteristics becomes possible for the system otherwise difficult with only the result of voltammogram.
Here, we will introduce two systems set-up (flow system and batch), for spectroelectrochemical measurement.
- Flow system
- Batch system
- Related product
 |
1. SEC2021 Spectrometer 2. SEC2022 Deuterium halogen light source 3. SEC2024 Platform 4. SEC-3F Spectroelectrochemical flow cell 5. Reference electrode screw type 6. Model 3325 Bi-Potentiostat 7. PC |
|
| 1 ∼ 3 | SEC2020 Spectrometer system (Cat. No. 013609) is a spectrometer that enables various spectrometric measurements, focusing on spectroelectrochemical measurement. |
| 4 | SEC-3F Spectroelectrochemical flow cell |
| 5 | Reference electrode screw type, it is sold separately. There is three types: for aqueous solution (RE-3VT Reference electrode Screw type (Ag/AgCl) (Cat. No. 014051)), for non aqueous solution (RE-7VN Non Aqueous reference electrode screw type (Cat. No. 013850)) and for alkaline solution (RE-61VT Reference electrode screw type for alkaline solution (Cat. No. 014052))※. |
| 6 | Model 3325 Bi-Potentiostat |
| 7 | The minimum recommended PC configuration is: - Processor: 1GHz or higher - RAM: 1 GB or higher - Hard Disk: 100 MB or higher - Screen Resolution: 1024 x 768 or higher - Operating System: WindowsTM 10 ⁄ 11 ∗ - Software: Microsoft .NET Framework 3.5 |
Please refer to the Windows lifecycle fact sheet.
(Note: Windows 10 in S mode is not supported, please switch out of S mode in Windows 10.)
※ Note:
When using with 014052 RE-61VT Reference electrode screw type for alkaline solution, please avoid the below conditions, because some contents and working electrodes have a low tolerance for alkaline solution.
➀ High concentrated alkaline solution
➁ High temperature condition
➂ Long time application
For general application without SEC2020 Spectrometer system
 |
1. SEC2021 Spectrometer 2. SEC2022 Deuterium halogen light source 3. SEC2023 Cuvette holder 4. SEC2024 Platform 5. SEC-CT Thin Layer Quartz Glass Spectroelectrochemical cell Kit 6. RE-1BP Reference electrode (Ag/AgCl) 7. Model 3325 Bi-Potentiostat 8. PC |
|
| 1 ∼ 4 | SEC2020 Spectrometer system (Cat. No. 013609) is a spectrometer that enables various spectrometric measurements, focusing on spectroelectrochemical measurement. |
| 5 | SEC-C SEC-CT Thin Layer Quartz Glass Spectroelectrochemical cell Kit Components of the SEC-C: - SEC-C Pt or Au Gauze working electrode - SEC-C/C05 Pt counter electrode - SEC-CT Thin Layer Quartz Glass cell - SEC-C Teflon Cap - Purge tube (ETFE) |
| 6 | Reference electrode is sold separately. There is two types: for aqueous solution and for non aqueous solution. |
| 7 | Model 3325 Bi-Potentiostat |
| 8 | The minimum recommended PC configuration is: - Processor: 1GHz or higher - RAM: 1 GB or higher - Hard Disk: 100 MB or higher - Screen Resolution: 1024 x 768 or higher - Operating System: WindowsTM 10 ⁄ 11 ∗ - Software: Microsoft .NET Framework 3.5 |
Please refer to the Windows lifecycle fact sheet.
(Note: Windows 10 in S mode is not supported, please switch out of S mode in Windows 10.)