Model 100 Syringe pump (2 channels)
Model 100 applies a micro-step motor mechanism permitting the application at a low flow rate.
The liquid crystal display makes easily the setup of the flow rate and operation time. It shows
an excellent stability in the flow rate. The flow rate could be adjusted in range of 0.001 µL/min
to 90 mL/min. Because of the wide range of the flow rate, this pump could be applied in flow
injection analysis, and sensor and microdialysis researches.
The setup configuration is remained internally and it is possible to repeatedly investigate with
the same conditions.
Features
- Dual syringe pump
- Liquid crystal display
- Excellent operation of user interface
- A variety of syringes in different sizes
- Remote control by computer
- Alarm verification
Model 100 Syringe pump
 |
1.Push block 2.Push block open nut 3. Syringe clamp 4. Safety nut 5. Lead screw 6. Power lamp 7. Stop - Pause - Start key 8. Navigation key 9. Liquid crystal display 10. Value input key |
At the back panel of the pump, there is a 9 pin RS-232 connector.
Specifications
| Syringe size | 0.5 µL - 60 mL |
| Power supply | 100 - 240 VAC, 50/60 Hz |
| Operation mechanism | Steeping motor |
| Resolution | 0.196 µm/step |
| Flow rate range | < 1 µL/h (10 µL syringe) - 90 mL/min (60 mL syringe) |
| Size | 240 (W) x 170 (D) x 110 (H) mm |
| Weight | 2.6 kg |
| Operating temperature | -25 - 80 °C |
| Operating humidity | 20 - 80% RH |
| Catalog No. | Description |  |
| 012085 | Model 100 Syringe pump 2 channels | |
| Optional | ||
| 009019 | ALS105 syringe 10 µL | |
| 009026 | ALS105 syringe 250 µL | |
| 009021 | ALS105 syringe 0.5 mL | |
| 009020 | ALS105 syringe 1.0 mL | |
| 009022 | ALS105 syringe 2.5 mL | |
| 009023 | ALS105 syringe 5.0 mL | |
| 009521 | FEP tube, ID: 0.12 mm (1 m) | |
| 009520 | FEP tube, ID: 0.15 mm (3 m) | |
| 009500 | Tube adaptor (10 pcs) | |
| 011621 | Liquid Switch | |
| 012771 | Push/Pull adaptor | |
| 000715 | Tee joint | |
Push/Pull adaptor: The suction of the sample could be performed using the push/pull adaptor. It will reduce the backpressure which will prevent the leakage at the tube joint and avoid that the air bubbles enter.
Related products
QCM Flow cell
/EQCM Flow cell
SEC-2F Spectroelectrochemical Flow Cell
SEC2000 - Spectrometer
